Gas And Oil Fired Heat Transfer Thermal Hot Oil Fluid Boiler For
Dryer Drying Machine
Heat Transfer Fluid heaters (hot oil heater) to oil (gas) as fuel
to oil as medium, using hot oil circulation pumps mandatory medium
for liquid circulation, the energy delivery device and then return
to Heat re-heating furnace with low pressure in the working
temperature was high, and can run on medium high-precision control.
System with high thermal efficiency, due to the overall module
installation, operation and easy maintenance, is a safe, efficient,
energy saving ideal choice for heating equipment.
Fuel oil (gas) from the burner flame after ignition temperature
generated within the coil to form into the radiation heating
surface, through the internal coil rotated by 180 °into the rear
forward, the foreign control of the mezzanine area convection
heating surface. Then enter the upper mezzanine, the outer coil of
the second mezzanine area, in the second mezzanine area to the rear
of the chimney into the atmosphere.
Technique data:
Rated thermal power is 0.12Mw (10×104kcal/h) to 16Mw
(160×104kcal/h).
Design pressure is equal to or greater than 1 Mpa.
Operating temperature is equal to or less than 350°C.
Thermal efficiency is between 60% and 85% according to the
difference of boiler type.
Technical Parameters
| Model No. | Thermal power(kcal/h) | Heating efficiency (%) | Max. working temp.(℃) | Medium circulation(M3/H) | Transport size (mm) | Weight (Kg) |
| YY(Q)W-120Y(Q) | 10*104 | ≥92.26 | 340 | 12.5 | Φ1060*2045 | 1215 |
| YY(Q)W-240Y(Q) | 20*104 | ≥92.26 | 340 | 18 | Φ1020*1980 | 1355 |
| YY(Q)W-350Y(Q) | 30*104 | ≥92.26 | 340 | 30 | Φ1212*2310 | 1590 |
| YY(Q)W-500Y(Q) | 40*104 | ≥92.26 | 340 | 30 | Φ1212*2730 | 1680 |
| YY(Q)W-700Y(Q) | 60*104 | ≥92.26 | 340 | 60 | Φ1400*3410 | 2715 |
| YY(Q)W-900Y(Q) | 80*104 | ≥92.26 | 340 | 80 | Φ1616*3400 | 3142 |
| YY(Q)W-1200Y(Q) | 100*104 | ≥92.26 | 340 | 100 | Φ1616*4000 | 3660 |
| YY(Q)W-1400Y(Q) | 120*104 | ≥92.26 | 340 | 100 | Φ1820*4905 | 5420 |
| YY(Q)W-2000Y(Q) | 160*104 | ≥92.26 | 340 | 100 | Φ1840*4950 | 7850 |
| YY(Q)W-2400Y(Q) | 200*104 | ≥92.26 | 340 | 160 | Φ2060*4700 | 8850 |
| YY(Q)W-3000Y(Q) | 250*104 | ≥92.26 | 340 | 180 | Φ2060*5450 | 9210 |
| YY(Q)W-3500Y(Q) | 300*104 | ≥92.26 | 340 | 200 | Φ2430*5965 | 9960 |
| YY(Q)W-4100Y(Q) | 350*104 | ≥92.26 | 340 | 250 | Φ2630*6990 | 1120 |
| YY(Q)W-4700Y(Q) | 400*104 | ≥92.26 | 340 | 250 | Φ2830*7100 | 1230 |
oil fired thermic fluid heater hot oil boilerThe Gas/Oil Fired
thermal oil boiler auxiliaries :
| Name | Quantity(unit/piece) |
| main body of thermal oil boiler | 1 |
| Oil Circulating pump | 1 |
| Gas/oil burner | 1 |
| oil filling pump | 1 |
| Filter | 1 |
| Electric control cabinet | 1 |
| high level oil storage tank | 1 |
| Low level oil storage tank | 1 |
| Valves and gauges | one batch for whole system |
Free-Installation
The complete boiler system is well skid-mounted on the basement,
also we have done the pipe(valves) connection and wire connection.
After receiving the boiler, user no need to do installation, just
filling the thermal fluid oil, join the fuel and electricity.
Entire boiler system is portable.
Boiler advantage
1.Prolong the boiler service life according to the cloesed
circulation heating, and protect the environment.
2.Increase the heating area by adopting the pipe coil structure.
3. There is a backup circulation pump. Once the circulating pump is
not available at the time, the backup circulation pump works
immediately.
4.Precise temperature control byu adopting complete running and
safety monitoring devices.
Application of thermal oil system
The series of thermal oil heater is widely used in the following
industries:
l Petrochemical Industries:polymerization, melted, condensation,
distillation, removal H2.
l Oil industry:fat and acid distillation, grease decomposition,
concentrated, esterification, vacuum deodorizer, high-temperature
cooking, advanced salad oil.
l Synthetic fiber industry: polymerization, melt spinning,
extending; drying.
l Textile printing and dyeing industry: heat setting, hot melt
dyeing, melt bake calendering drying, high temperature stenter, oar
yarn.
l Plastics and rubber industry:hot pressing, hot cast,
vulcanization molding, calendering injection machine, plastic
mixer, conveyor dryer, screw extruder.
l Paper Industry: dry, corrugated paper processing, egg tray, food
cardboard drying, calendering machine, roller.
l Timber industry: multilayer plywood, fiberboard molding, plywood,
wood drying, steaming equipment.
l Building materials industry: road bitumen heating, gypsum board
drying, heating bitumen concrete, concrete elements curing, drying
equipment.
l Air-conditioning industry:industrial plants, residential and
hotel building heating.
l Detergent Industry: cooking boiler, autoclave, spray-washing
tower, a conveyorized dryer, lipolysis device distillation column.
l The automotive industry:the tunnel-type drying room, degreasing
baths, phosphate processing equipment.
l Electrical equipment industry: calendering machine, the platen
machines, vacuum pan, dryer.
FAQ
1.What is the highest temperature that thermal oil heater could
achieve?
thermal oil heater can reach as high as 330℃, and working under low
pressure (<1.0MPa)
2.What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate
material, the highest temperature could be as high as 1100℃, and
the lower temperature could be 700℃.
The highest heat resistance temperature of furnace could be about
1700℃~1800℃.
3.What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the
industries that need the temperature of 150~350℃, to instead of
steam. The hot oil has the advantages of high transfer efficiency,
fast heat transfer, and good thermal stability.
