2 Ton Industrial Gas Diesel Oil Fired Steam Boiler For Tomato Sauce
Production
General Introduction
WNS series oil& gas fired steam boiler adopts horizontal three-pass
wet-back structure,, equipped with international first-level brand
burners and valve groups, and independently developed high-matching
PLC control system to realize muitiple linkages.
Rated steam capacity:0.5ton-20ton/h;
Fuel: natural gas, diesel, heavy fuel oil, Ipg, Ing, cng, biogas,
etc;
Rated steam
pressure:1.0Mpa(10bar),1.25Mpa(13bar),1.6Mpa(16bar),2.5Mpa(25bar);
Condenser principle
Main features
1. Boiler proprietary technology
Full wet backburn chamber, backburn chamber and back tube plate
butt joint, boiler full butt welding, stress, more reliable
quality.
2, large diameter corrugated furnace
The boiler combustion chamber is composed of a large diameter full
ripple furnace with large combustion space, complete fuel
combustion, effective heat absorption expansion and large radiation
heating surface.
3. Sufficient heat
The heating area of the boiler is designed and configured according
to ≥25m2/ steam ton, fully absorbing effective heat, low smoke
exhaust temperature, small heat loss, ensuring sufficient output
and efficiency
4. High quality steam
Large pot shell diameter, large water capacity, strong adaptability
to load changes, stable output;The steam space volume is large, the
net distance between the soda interface and the steam outlet is
high enough, and the steam humidity is low.
5. Safe precipitation time is sufficient
The boiler combustor is arranged in a low position, the water level
is determined in accordance with the regulations, and the water
level fluctuation time is strictly in accordance with the
international general norms and standards, with sufficient safe
precipitation space, to ensure the operation safety of the boiler.
Technical Parameter
| Model | Rated | Rated | Rated | Thermal | Fuel Consumption | Equipment Power | Weight |
Capacity (t/h) | Pressure (Mpa) | Temperature (C) | Efficiency (%) | Light oil (Kg/h) | Natural gas (Nm³/h) | Burn light oil | Burn gas | (t) |
| WNS1 | 1 | 0.7/1.0/1.25 | 170/184/194 | >90 | 45-100 | 18-100 | 1.5 | 1.5 | 4 |
| WNS1.5 | 1.5 | >90.2 | 101.73 | 123.47 | 2.2 | 1.5 | 5 |
| WNS2 | 2 | 1.0/1.25/1.6 | 184/194/204 | >90.2 | 137.09 | 165.97 | 2.2 | 3 | 8 |
| WNS3 | 3 | >91 | 205.75 | 249.6 | 7.5 | 7.5 | 9 |
| WNS4 | 4 | >91 | 272.3 | 329.5 | 9 | 7.5 | 13 |
| WNS5 | 5 | >91.5 | 134-402 | 80-500 | 17.2 | 15 | 15 |
| WNS6 | 6 | >91.5 | 134-402 | 80-500 | 15 | 15 | 17 |
| WN8 | 8 | 1.25/1.6/2.5 | 194/204/225 | >91.6 | 523.4 | 631.5 | 26 | 22 | 21 |
| WNS10 | 10 | >91.6 | 212-890 | 150-1085 | 26 | 22 | 22 |
| WNS12 | 12 | >91.8 | 915.5 | 1090 | 26 | 22 | 27 |
| WNS15 | 15 | >91.8 | 931.5 | 1094.4 | / | / | 34 |
| WNS20 | 20 | >92 | 1380.33 | 1598.44 | / | / | 45 |
| Note: Parameter is for reference only, we can design the boilers
based on customers’ needs. |
WNS series oil/gas steam boiler have excellent performance
advantages and save fuel
High-quality aluminum silicate fiber is used, and refractory mud is
used for heat preservation. The temperature of the furnace body is
controlled below 45°C, which effectively controls heat loss.
An economizer is installed at the tail of the boiler flue to use
the tail of the boiler to remove the waste heat in the flue gas,
increase the boiler inlet water temperature, the exhaust gas
temperature is reduced to 60 degrees, and the thermal efficiency is
increased to more than 98%.
Sufficient storage space and heating surface enable this oil/gas
boiler to produce high heating power efficiently.
Strict quality supervision and inspection of boilers, safe and
worry-free
All longitudinal and circumferential seam welds are subjected to
100% radiographic inspection to prevent unqualified welds
Seven process stop points are set up, and seven different
responsible teachers are separately checked. If any one fails, it
will not be able to proceed to the next process.
Humanized boiler design, easier operation and maintenance
horizontal oil/gas fired steam boilers have the characteristics of
fully automatic operation. The combustion, water level, temperature
and steam pressure are all automatically adjusted and protected,
which can realize unattended operation.
The smoke box door of the industrial steam boiler adopts a hinge
structure and opens in a window style, which is convenient for
maintenance, inspection and cleaning.
Boiler Application
Gas fired steam boiler is being widely used in hospitals, schools,
textile mills, garment factories, large supermarket, garment
factories, dyeing factory, hotel, dining room, dining room,
swimming pool, food factory, beverage factory, soy products, meat
products factory, cannery, brewery, pharmaceutical factory, packing
plants, building materials factory, paint factory and other places
of the enterprises and institutions.
FAQ
1. What are the available fuel for the oil gas fired boiler?
Oil gas fired boiler could burn both liquid fuel and gaseous fuel.
The liquid fuel could be heavy oil, light oil, diesel, furnace oil,
bunker oil, LPG (liquefied petroleum gas), etc. The gaseous fuel
could be natural gas, city gas, bio-gas, etc.
2. Whether the boiler can burn dual fuel or multi-fuel?
boiler have oil burner, gas burner, and oil&gas dual fuel
burner, we can offer the specific burner based on customers’
requirement.
3. What is the thickness of combustion chamber?
the thickness of corrugated furnace is different based on working
pressure and furnace diameter, generally, the thickness is between
10~18mm, large combustion space, and combustion sufficient.
4. What is the inlet pressure of gas burner?
The inlet gas pressure is different for different capacity boiler,
for example, the pressure for 2 ton steam capacity boiler is about
8~10KPa, while for 4 ton steam capacity boiler is about 18~20KPa.
5.The brand of burner?
The brands of burner are Italy Baltur, Rellio, Elco, etc.
