Competitive Price Horizontal Diesel Natural Gas Fired Industrial
Thermal Oil Boilers Supplier In China
YY(Q)W series gas oil fired hot oil boiler is packed and full automatic thermal oil boiler; adopts three-pass
structure, full corrugated coil. The heat carrier is heat
conduction oil, rated working pressure 1.1MPa, working temperature
^350°C. After boiler arriving at users' site, only need to consider
to fill the heat conduction oil, connect fuel (gas or oil) and
electricity source.
This thermal oil boiler has compact structure. The heating area is
constituted by close-knit coil pipes from inside to outside.Inside
coil pipes are the radiation heating surface, and the outer surface
of inside coil pipes and outside coil pipes form a convection
heating surface.Fuel burn fully in the combustion chamber, the
radiation heating surface absorb most heat, and then high
temperature flue gas goes into convection heating surface to
exchange heat, then go into the air preheater (or waste heat
boiler) to heat the required (or water).at last, the low
temperature flue gas discharges to the aerosphere through the
chimney.
Technical parameters
Item
Model | Rated Power
(KW) | Design Pressure
(Mpa) | Medium Outlet
Tem.(C) | Heating
Area
(M2) | Fuel Consumption | Furnace Oil
Content
(M3) | Boiler
Dimensions
(m) | Transport Weight
(T) |
Light Oil
(kg/h) | Natural Gas (Nm3/h) |
| YY(Q)W-120 | 120 | 1.1 | ≤350 | 9.8 | 12 | 15 | 0.1 | 1.6x1.0x1.5 | 1.5 |
| YY(Q)W-240 | 240 | 14.5 | 25 | 30 | 0.15 | 1.9x1.2x1.8 | 2 |
| YY(Q)W-350 | 350 | 21.3 | 37 | 44 | 0.25 | 2.1x1.3x2.0 | 2.58 |
| YY(Q)W-500 | 500 | 24 | 52 | 63 | 0.3 | 2.2x1.3x2.0 | 3 |
| YY(Q)W-700 | 700 | 40 | 69 | 83 | 0.5 | 3.2x1.4x2.2 | 3.7 |
| YY(Q)W-1000 | 1000 | 50 | 100 | 120 | 0.8 | 3.3x1.6x2.4 | 5 |
| YY(Q)W-1200 | 1200 | 64.6 | 120 | 145 | 0.85 | 3.8x1.7x2.5 | 5.8 |
| YY(Q)W-1400 | 1400 | 78.5 | 140 | 170 | 1.1 | 4.1x1.9x2.7 | 6.7 |
| YY(Q)W-1800 | 1800 | 87 | 180 | 220 | 1.2 | 4.6x2.0x3.0 | 7.8 |
| YY(Q)W-2100 | 2100 | 94.5 | 210 | 260 | 1.7 | 5.0x2.0x3.0 | 8.8 |
| YY(Q)W-2400 | 2400 | 106.2 | 244 | 296 | 1.9 | 5.0x2.2x3.1 | 9.8 |
| YY(Q)W-3000 | 3000 | 163 | 300 | 365 | 3.5 | 5.9x2.4x3.4 | 15.5 |
| YY(Q)W-3500 | 3500 | 205.2 | 350 | 425 | 3.8 | 6.5x2.4x3.6 | 17.8 |
Main features of industrial thermal oil boiler
(1) High Quality Control: In manufacturing processes, we has adopting steel strength test,
automatic steel cutting/ plate rolling/ welding, 100% x-ray welding check, magnetic particle check c-scan ultrasonography
check, fluorescent penetrating check, hydraulic (water) pressure
test, boiler thermal efficiency test,etc, to make sure all finished
products is qualified.
(2) Durable Coil Heater adopting high quality corrugated coil to carry the heat conduction
oil, increase the heat transfer area, reasonable gap between coil
tubes to fit the hot expansion and cold contraction . Average coil
tubes' working life more than 17years.
(3) Automatic Safe Operation: Full automatic PLC ON/OFF controller; free settable thermal
operation temperature and working time, automatic temperature
control, automatic over-pressure/ over temperature interlock chain
stop protection, visible system's working states (burner's states,
system working pressure/ oil temperature) on screen etc.
Installation
Scope of application:
1. Chemical industry - oleochemical, polymerization industry,
reaction tank, distillation, concentration.
2, plastic industry - plastic guns, extrusion stereotypes.
3, textile industry - resin setting machine, dyeing machine, drying
room, high temperature machine, roller machine.
4, the rubber industry - rubber vulcanization heating.
5, food industry - cooking, drying, vegetable oil refining.
6. Forest industry--heating and setting of splint, Pauli board and
fiberboard.
7, paper industry - multi-layer cardboard packaging, drying,
drying.
8. Others - heating of metal plating bath, paint condensation,
drying, distillation, reduction, concentration, dehydration, and
melting of asphalt in the pharmaceutical industry.
